Demo Mode - Yamaha Digital Sound Projector YSP-3050 Owner's Manual

Adjusting the system parameters
Parameter to be changed and front panel display
MEMORY PROTECT
You can protect the settings you saved in the system memory of this unit from being
accidentally erased or unwantedly changed.
MAX VOLUME
You can set the maximum volume level so that this unit will not output sound beyond the
limited volume level.
TURN ON VOLUME
You can set the initial volume level when the power of this unit is turned on.
MONITOR CHECK
Use this feature to activate or deactivate the monitor check function of this unit. When this
parameter is set to "YES", this unit receives the information on the available video signal
resolutions from the video monitor connected via HDMI (see page 18). If your TV monitor is
not compatible with 1080i and/or 720p of resolutions, you cannot select "1080i" and/or
"720p" in "UP-SCALING" (see page 84).

DEMO MODE

You can test the sound beam output from this unit to experience the sound beam.
PANEL INPUT KEY
You can disable the INPUT on the front panel when you adjust the system parameters.
Disabling the front panel keys
You can disable the front panel keys except when you adjust the system parameters.
92
En
Parameter settings
ON, OFF
MAX, 99 to 01, MIN
Control step: 1
MAX, 99 to 01, OFF
Control step: 1
YES, SKIP
Note
If you change the setting of
"MONITOR CHECK",
"UP-SCALING" is
automatically set to "OFF"
(see page 87).
ON, OFF
ON, OFF
ON, OFF