Case 1: Connections Using Hdmi Cables - Yamaha Digital Sound Projector YSP-3050 Owner's Manual

Connections

Case 1: Connections using HDMI cables

This unit is equipped with 2 HDMI input jacks and 1 HDMI output jack. If your TV and other components have HDMI
jacks, use HDMI cables for simpler and easier connections, and you can skip the connection procedures from page 19 to
21. If your TV has a built-in digital satellite tuner and an optical digital output jack, connect the optical digital output jack
on your TV to the TV/STB OPTICAL DIGITAL IN jack on this unit.
y
• We recommend that you secure the HDMI cable(s) with adhesive tape, etc. once you have connected the HDMI cable(s) to the HDMI
jack(s) of this unit.
• This unit outputs analog video signals input at the video/component video jacks at the HDMI OUT jack. Similarly, this unit outputs
analog audio signals input at the analog input jacks at the HDMI OUT jack.
*
If TV built-in tuner is
used, connect the optical
digital output jack on your
TV to the TV/STB
OPTICAL DIGITAL
INPUT jack on this unit
(see page 21).
Audio/Video
A
HDMI cable
18
En
Rear panel of this unit
A
HDMI
input
TV
STB
*
This connection (except
for a game console) is not
necessary if your TV has a
DVD
built-in digital satellite
IN
tuner, cable TV tuner, or
digital airwave tuner.
OUT
HDMI
A
HDMI
output
DVD player/recorder
A
HDMI
output
Digital satellite tuner,
cable TV tuner,
digital airwave tuner,
or game console