Yamaha Digital Sound Projector YSP-3050 Owner's Manual page 117

YSP-3050
QUICK REFERENCE GUIDE
This quick reference guide explains steps to connect a TV and a DVD player/recorder to this unit and achieve
the surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner's Manual.
1
Installing this unit
Decide where to install this unit.
Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be
achieved. You may install this unit in parallel with the wall or in the corner.
Install this unit in the exact center of the wall when it is Install this unit in the corner at a 40º to 50º angle from the
measured from the left and right corners. adjacent walls.
An object, such as furniture An object, such as furniture
Front left channel 40º to 50º
Center channel
Front right channel
Surround left channel
Surround right channel
Install this unit using a rack, etc.
Depending on your installation environment, connections with external components (see "2 Connecting external components to this unit") can be done before
installing this unit. We recommend that you temporarily place and arrange all components in order to decide which procedure must come first.
install this unit on top of a rack, etc., use the supplied fasteners to prevent an accidental fall of this unit.
For further information on installation, see page 13 in the Owner's Manual.
The following is an example of installing this unit in a rack. To prevent this unit or the floor from being scratched, we recommend putting a piece of
cloth on the floor in step 2.
Place this unit in front of Place this unit upside down Install this unit in the
the rack. and connect this unit to your rack.
TV and DVD player/recorder.
Hint
• To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor.
• You can also use the optional metal wall bracket (sold separately) to mount this unit on the wall. For details, refer to the instructions
supplied with the metal wall bracket.
Note
Be careful not to leave scratches on this unit or the rack.
Printed in Malaysia WK75620 [En]
2
Supplied accessories used for connections Connecting external components to this unit
and operations in this guide
Audio pin cable (x1)
OSD* video pin cable (x1)
Connecting external components such as a TV or DVD player/recorder to this unit.
Optical cable (x1)
Coaxial cable (x1)
Connect your TV or DVD player/recorder to this unit using appropriate cables as shown below.
Digital audio pin cable (x1)
For further information on connecting other components, see pages 16 to 23 in the Owner's Manual.
IntelliBeam microphone (x1)
Cardboard microphone stand (x1)
Demonstration DVD (x1) This connection example shows a way to connect external components such as a TV or DVD
Connection
player/recorder to this unit by using the supplied cable.
*OSD: On-Screen Display
DVD player/recorder and the analog/digital audio from the TV.
example 1
DVD player/recorder to make a video connection between your DVD player/recorder and TV.
Connect cables in the following order
Audio pin cable
(Inputs the TV analog audio sounds
OSD video pin cable
(Displays the YSP-3050 menu screen
Front left channel
Center channel
ANALOG VIDEO
Front right channel
AUDIO OUTPUT INPUT
1
L
Surround left channel
R
Surround right channel
In case you
OUT
Installation is completed. AUDIO INPUT VIDEO INPUT
VIDEO COMPONENT
AUX 1 TV/STB SUBWOOFER STB
* The rear panel illustration shows jacks and their names to help you find them easily.
They are not exactly the same as the ones on the actual rear panel of this unit.
Note
Check whether the digital audio output of your TV and DVD
player/recorder is turned on.
You can enjoy the multi-channel audio from the
Use the video pin cable supplied with your
Supplied
Optical cable
to this unit)
(Inputs the TV digital audio sounds to this unit)
Digital audio pin cable
on the TV)
(Inputs the DVD digital audio sounds to this unit)
TV
DVD player/recorder
Video connection
OPTICAL COAXIAL
DIGITAL OUTPUT DIGITAL OUTPUT
1. Pull out the cap
2
2. Check the direction
YSP-3050
DIGITAL INPUT
AUX 2 DVD To the AC wall outlet
COAXIAL
OPTICAL
Do not plug the power supply cable
Subwoofer
DVD AUX 1 TV/STB
into an AC wall outlet until all
connections are complete.
Audio connection
If you have connected external components,
follow the steps on the backside to start the
AUTO SETUP procedure.
This connection example shows a way to make the most of the capability of this unit.
Connection
DVD audio and video with higher quality via the HDMI cable.
example 2 digital satellite tuner, cable TV tuner, or digital airwave tuner, connect a digital satellite tuner, cable TV
tuner, or digital airwave tuner via the HDMI cable. For details, see "Connections using HDMI cables" on
page 18 and "Using the HDMI control feature" on page 73 in the Owner's Manual.
Connect cables in the following order
Sold separately
HDMI cable
(Displays the DVD digital video and the YSP-3050 menu
screen on the TV)
HDMI cable
(Inputs the DVD digital audio/video signals to this unit)
TV
DVD player/recorder
HDMI HDMI
INPUT OUTPUT
Optical cable
Pull out the cap
before connecting
the optical cable,
and then check
the direction to
(Sold separately)
insert the cable.
* If TV built-in tuner is used, connect the
optical digital output jack on your TV to YSP-3050
the TV/STB OPTICAL DIGITAL INPUT
jack on this unit (see "Connecting a TV
without an HDMI cable" on page 21 in
the Owner's Manual).
OUT
Subwoofer
VIDEO
Audio connection
SUBWOOFER
Hint
If you connect this unit to an HDMI control-compatible TV (except
some models) via HDMI, you can use the remote control supplied
with your TV to turn on or off the power, select the audio output
component, and adjust the volume level of this unit.
Continued
Note
on the back
Check whether the digital audio output of your TV and DVD
player/recorder is turned on.
You can enjoy
In case your TV does not have a built-in
Digital satellite tuner/
Cable TV tuner/
Digital airwave tuner
Subwoofer
HDMI connection
This connection is not
necessary if your TV has a
built-in digital satellite tuner,
cable TV tuner, or digital
airwave tuner. Use the optical
cable supplied with this unit to
make an audio connection
between your TV and this unit.
For details, see "Connection
STB
(Sold separately) example 1".
DVD
IN
OUT
HDMI
To the AC wall outlet
Do not plug the power supply cable
into an AC wall outlet until all
connections are complete.
If you have connected external components,
follow the steps on the backside to start the
Continued
AUTO SETUP procedure. on the back
©2008 All rights reserved.