Controls And Functions; Front Panel - Yamaha TX-497 Owner's Manual

Front panel

1
POWER
FREQ/TEXT EON
PTY SEEK
MODE START
A B C D
(U.K. and Europe models)
1 POWER
Turns on or off the power of this unit.
2 Remote control sensor
Receives signals from a remote control provided with a
YAMAHA amplifier or receiver.
3 Front panel display
Shows information about the operational status of this unit
(see page 4).
4 MEMORY (MAN'L/AUTO FM)
Stores a station in the memory (see page 13).
Hold down this button for more than 3 seconds to start
automatic preset tuning (see page 12).
5 FM/AM
Press this button to switch the reception band between FM
and AM.
6 EDIT
Exchanges preset station numbers (see page 14).
7 TUNING MODE (AUTO/MAN'L)
Switches between automatic tuning (AUTO indicator on)
and manual tuning (AUTO indicator off).
8 A/B/C/D/E
Selects one of the 5 preset station groups (A to E).
9 Preset station buttons
Select a preset station number (1 to 8).
0 l TUNING h
Selects a frequency.
– Press l to tune into a lower frequency.
– Press h to tune into a higher frequency.

CONTROLS AND FUNCTIONS

2 3
FREQ/TEXT FREQ/TEXT EON EON
PTY SEEK PTY SEEK
MODE MODE START START
A/B/C/D/E
1 2 3
8
4 5 6 7
FM/AM EDIT
MEMORY TUNING MODE
MAN'L/AUTO FM AUTO/MAN'L
4 5 6 7 8
9
■ U.K. and Europe models only
The Radio Data System tuning buttons numbered from A
to D are only applicable to the U.K. and Europe models.
A FREQ/TEXT
Press this button when the unit is receiving a Radio Data
System station to cycle the display between the PS mode,
PTY mode, RT mode, CT mode (if the station offers those
Radio Data System data services) and/or the frequency
display.
B PTY SEEK MODE
Press this button to set the unit to the PTY SEEK mode.
C PTY SEEK START
Press this button to begin searching for a station after the
desired program type has been selected in the PTY SEEK
mode.
D EON
Press this button to select a radio program type (NEWS,
INFO, AFFAIRS, SPORT) to tune in automatically.
CONTROLS AND FUNCTIONS
TUNING
l h
0
3