Controls And Their Functions - Yamaha TX-10MKII Owner's Manual

CONTROLS AND THEIR FUNCTIONS

FRONT PANEL
NATURAL SOUND
POWER
1 2
1
POWER switch
Press this switch to switch the power on. Press it again to
switch the power off.
2
Remote control sensor
Receives signals from a remote control transmitter provided
with a YAMAHA amplifier or receiver.
3
RDS MODE/FREQ button
When an RDS station is received, pressing this button changes
the display mode into the PS mode, PTY mode, RT mode
and/or CT mode (if the station employs those RDS data
services), and frequency display in turn.
4
PTY SEEK MODE button
When this button is pressed, the unit turns into the PTY SEEK
mode.
5
PTY SEEK START button
Press this button to begin searching for a station after the
desired program type is selected in the PTY SEEK mode.
6
EON button
Press this button to select a desired program type (NEWS,
INFO, AFFAIRS, SPORT) when you want to call a radio
program of that program type automatically.
7
KEY MODE/EDIT button
Whenever this button is pressed, "PRESET" appears and
disappears on the display alternately. This is for switching the
function of the PRESET STATIONS (TUNING) DOWN/UP
buttons.
This button is also used to exchange the places of two preset
stations with each other.
8
MEMORY (MAN'L/AUTO FM) button
When this button is pressed, the MEMO indicator flashes for
about 5 seconds. During this period, select a desired preset
station number by using the A/B/C/D/E button and the
PRESET STATIONS DOWN or UP button, and then press this
button again to enter the displayed station into the memory.
When this button is pressed and held for about 3 seconds, the
automatic preset tuning begins. (Refer to page 13 for details.)
II
AM/FM STEREO TUNER TX–10MK
RDS MODE PTY SEEK EON
/FREQ
MODE START
3 4 5 6 78
KEY MODE MEMORY TUNING FM/AM
/EDIT MODE
MAN'L/ AUTO/
AUTO FM MAN'L MONO
9 0
9
TUNING MODE (AUTO/MAN'L MONO) button
Press this button to switch the tuning mode to automatic or
manual. To select the automatic tuning mode, press this
button so that "AUTO" lights up on the display. To select the
manual tuning mode, press this button so that "AUTO" goes
off.
0
FM/AM button
Press this button to switch the reception band to FM or AM.
A
A/B/C/D/E button
Press this button to select a desired group (A–E) of preset
stations.
B
PRESET STATIONS DOWN and UP buttons
When this unit is in the preset tuning mode, these buttons are
used for selecting a preset station number. Pressing the "UP"
button. Selects a higher preset station number and pressing
the "DOWN" button selects a lower preset station number.
TUNING DOWN and UP buttons
When this unit is in normal tuning mode, these buttons are
used for tuning search. Press the "UP" button to tune in to
higher frequencies, and press the "DOWN" button to tune in to
lower frequencies.
PTY SELECTOR buttons
When this unit is in the PTY SEEK mode, pressing these
buttons changes the currently selected program type.
C
Display panel
Shows station frequencies and various information. (Refer to
the next page for details.)
C
PRESET STATIONS
DOWN UP
A/B/C/D/E
TUNING
PTY SELECTOR
A B
7