Controls And Their Functions; Front Panel - Yamaha TX-592RDS Owner's Manual

CONTROLS AND THEIR FUNCTIONS

FRONT PANEL

1
NATURAL SOUND AM/FM STEREO TUNER
STANDBY/ON
1
STANDBY/ON switch
Press this switch to turn the power to this unit on. Press it
again to turn this unit into the standby mode.
Standby mode
In this state, this unit consumes a very small quantity of
power to receive infrared-signals from the remote control
transmitter.
2
Display panel
Shows station frequencies and various information. (Refer to
the next page for details.)
3
Remote control sensor
Receives signals from a remote control transmitter provided
with a YAMAHA amplifier or receiver.
4
PRESET STATIONS buttons
Select a preset station number (1 to 8).
5
TUNING (PTY SELECTOR) control
Used to tune in to a desired station. This control is also used to
call a preset RDS station by program type.
6
RDS MODE/FREQ button
When an RDS station is received, pressing this button changes
the display mode into the PS mode, PTY mode, RT mode
and/or CT mode (if the station employs those RDS data
services), and frequency display in turn.
7
PTY SEEK MODE button
When this button is pressed, the unit turns into the PTY SEEK
mode.
8
PTY SEEK START button
Press this button to begin searching for a station after the
desired program type is selected in the PTY SEEK mode.
2
TX-592RDS
RDS MODE/FREQ PTY SEEK
MODE
6 7 8 9
9
Press this button to select a desired program type (NEWS,
INFO, AFFAIRS, SPORT) when you want to call a radio
program of that program type automatically.
0
Press this button to select a desired group (A–E) of preset
stations.
A
When this button is pressed, the MEMO indicator flashes for
about 5 seconds. During this period, press the desired
PRESET STATIONS button to enter the displayed station into
the memory.
When this button is pressed and held for more than 3 seconds,
the automatic preset tuning begins. (Refer to page 11 for
details.)
B
This button is used to exchange the places of two preset
stations with each other.
C
Press this button to switch the reception band to FM or AM.
D
Press this button to switch the tuning mode to automatic or
manual. To select the automatic tuning mode, press this
button so that the "AUTO" indicator lights up on the display. To
select the manual tuning mode, press this button so that the
"AUTO" indicator goes off.
3 4
PRESET STATIONS
1 2 3
5 6 7
EON A/B/C/D/E MEMORY EDIT FM/AM
START MAN'L/AUTO FM
0 A B
C
EON button
A/B/C/D/E button
MEMORY (MAN'L/AUTO FM) button
EDIT button
FM/AM button
TUNING MODE (AUTO/MAN'L MONO) button
5
TUNING
4
8
PTY SELECTOR
TUNING MODE
AUTO/MAN'L MONO
D
7