Yamaha TX-497 Owner's Manual page 17

■ Manually presetting stations
You can also store up to 40 stations (8 stations x 5 groups)
manually.
A/B/C/D/E
POWER 1 2 3
2
1
Tune into a station.
See page 11 for tuning instructions.
When tuned into a station, the front panel display
shows the frequency of the station received.
2
Press A/B/C/D/E repeatedly to select a preset
station group (A to E) in the front panel
display.
The station group is displayed in the front panel
display.
A/B/C/D/E
3
Press MEMORY (MAN'L/AUTO FM).
The MEMO indicator flashes for about 5 seconds.
MEMORY
MAN'L/AUTO FM
3
FM/AM EDIT
MEMORY TUNING MODE
MAN'L/AUTO FM AUTO/MAN'L
TUNING
4 5 6 7 8 l h
4
ST
MEMO
Flashes
4
Press the preset station number button
(1 to 8) you want to store while the MEMO
indicator is flashing.
1 2 3 4
Shows the displayed station has
been stored as A1.
5
Repeat steps 1 to 4 to store other stations.
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• The reception mode (stereo or monaural) is stored along with
the station frequency.
TUNING
5 6 7 8
AUTO ST
MHz
13