Yamaha RX-V661 Owner's Manual page 95

Operate the following operations after activating the Zone 2
operation mode.
Operating Zone 2
Rotate the I INPUT selector to select the
desired input source while the ZONE2 indicator
is flashing in the front panel display.
• Select "TUNER" as the input source to use the TUNER
features in Zone 2. For details about the TUNER
operations, see "FM/AM tuning" on page 50.
• Select "XM" as the input source to use the XM
Satellite Radio features in Zone 2. For details about the
XM Satellite Radio operations, see "XM Satellite
Radio tuning" on page 53.
• Select "V-AUX" as the input source to use iPod
features in Zone 2. For details about the iPod
operations, see "Using iPod™" on page 58.
Set Zone 2 to the standby mode
Press 8 ZONE 2 ON/OFF to set Zone 2 to the
standby mode.
■ Setting the remote control to the Zone 2
mode
The remote control is originally set to the main mode to
control the main zone. To control Zone 2 with the remote
control, you must first set the remote control to the Zone 2
mode.
Press U CODE SET using a ballpoint pen or
1
a similar object.
The V TRANSMIT indicator on the remote control
flashes twice.
CODE SET TRANSMIT
POWER POWER STANDBY POWER
TV AV
2
Press the numeric buttons ( B ) to enter the
code number "9992".
CLASSICAL LIVE/CLUB ENTERTAIN MOVIE
1 2 3 4
STEREO ENHANCER STRAIGHT PURE DIRECT
5 6 7 8
SUR. DECODE NIGHT
9 0
■ Controlling Zone 2 with the remote
Turning on Zone 2
Press and hold H POWER or G STANDBY and
then press A
Zone 2 mode.
• Press
• Press
The V TRANSMIT indicator on the remote control lights
up while the remote control is set to the Zone 2 mode.
Notes
• When the remote control is set to the Zone 2 mode,
H
the input selector buttons are set to control Zone 2. However,
the rest of the remote control buttons remain in the main mode.
• The remote control automatically exits from the Zone 2 mode in
the following cases:
– when you do not make any operations within 10 seconds after
– when you press a remote control button other than
Activating the Zone 2 operation mode
Press H POWER to turn on Zone 2.
TRANSMIT
Operating Zone 2
Flashes
Press one of the input selector buttons ( A ) to
select the desired input source of Zone 2.
Setting Zone 2 to the standby mode
Press G STANDBY to set Zone 2 to the standby
TRANSMIT
mode.
Flashes
Using multi-zone configuration
control
to set the remote control to the
H
POWER when the main zone is turned on.
G
STANDBY when the main zone is turned off.
While holding
POWER
down
or
PHONO
STANDBY
G J
POWER, STANDBY,
the remote control is set to the Zone 2 mode.
H G J
POWER, STANDBY,
and the input selector buttons.
TRANSMIT
Lights up
L
VOLUME +/–, MUTE, and
L
VOLUME +/–, MUTE,
91
En