Yamaha RX-V661 Owner's Manual page 35

9
Press D l / h repeatedly to toggle between
the setup result displays.
Results of the speaker
connection and wiring
Results of the speaker
distance from the
listening position
Results of the setting of
each speaker size
Results of the parametric
equalizer of each speaker
Results of the speaker
output level
y
If you are not satisfied with the results or want to manually
adjust each parameter, run "MANUAL SETUP" (see
page 69).
Notes
• The distances displayed in the "DISTANCE" results may
be longer than the actual distance depending on the
characteristics of your subwoofer.
• In the "EQ" results, different values may be set for the
same frequency to provide finer adjustments.
Optimizing the speaker setting for your listening room
Press D ENTER to return to the top
10
"AUTO:RESULT" display.
AUTO:RESULT
. RESULT
SP
DIST: 14.0/17.0ft
LVL : -9.0/+6.5dB
> SET
[ ]/[ ]:Up/Down
[ENTER]:Enter
11
Make sure the pointer is pointing at "SET"
and "CANCEL" and then press D l / h to
select "SET" or "CANCEL".
AUTO:RESULT
RESULT
SP
DIST: 14.0/17.0ft
LVL : -9.0/+6.5dB
.
SET
>
[ ]/[ ]:Up/Down
[ENTER]:Enter
Choices: SET, CANCEL
• Select "SET" to confirm the "AUTO SETUP"
results.
• Select "CANCEL" to cancel the "AUTO SETUP"
results.
Press D ENTER to confirm your selection.
12
The top "SET MENU" display appears in the OSD.
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
.A;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
Press N SET MENU to exit from "SET
13
MENU".
14
Disconnect the optimizer microphone from
this unit.
The optimizer microphone is sensitive to heat. Keep it
away from direct sunlight and do not place it on top
of this unit.
y
If you change speakers, speaker positions, or the layout of
your listening environment, run "AUTO SETUP" again to
recalibrate your system.
: 3/4/0.1
CANCEL
: 3/4/0.1
CANCEL
31
En