Basic Setup; Using Basic Setup - Yamaha RX-V2400 Owner's Manual

BASIC SETUP

The basic system parameters are set automatically when
you run auto setup (page 24). The basic settings are useful
if you want to quickly setup your speakers or to manually
adjust some of the items set in
y
• If you wish to configure the unit manually using more precise
adjustments, use the detailed parameters in the SOUND menu
(page 49) instead of using the BASIC menu.
• Altering any parameters in the BASIC menu will reset all
parameters in the SOUND menu.

Using BASIC setup

A/B/C/D/E
TV INPUT
TV VOL
TV MUTE
2~9
ON SCREEN
LEVEL
SLEEP TEST
1
Set PARAMETER/SET MENU to
SET MENU.
2
Press k/n repeatedly to select
MANUAL SETUP, then press –/+ to enter the
selected category.
SET MENU
;AUTO SETUP
. ;MANUAL SETUP
/
- / +
If k is pressed when AUTO SETUP is selected, or if
n is pressed when MANUAL SETUP is selected,
SET MENU will be closed. Press k/n to open SET
MENU again.
3
Press n once to select BASIC MENU,
then press –/+ to enter the menu item.
28
BASIC SETUP
.
auto setup
PRESET
MUTE
CH VOLUME
STEREO
DISC EFFECT
1
PARAMETER
SET MENU
PARAMETER
SET MENU
then
: Up/Down
: Select
4
When ROOM is selected, press –/+ to change
the setting.
Select the size of the room you have installed your
speakers in. Roughly speaking, the room sizes are
defined as follows:
[U.S.A. and Canada models]
S (small)
16 x 13ft, 200ft
M (medium) 20 x 16ft, 300ft
L (large)
26 x 19ft, 450ft
[Other models]
S (small)
3.6 x 2.8m, 10m
M (medium) 4.8 x 4.0m, 20m
L (large)
6.3 x 5.0m, 30m
1 BASIC MENU 1/2
. ROOM :
SWFR : [YES NONE
PRESENCE;;;;NONE
SPEAKERS;;;;7spk
5
Press n to select SWFR, then press –/+ to
select:
YES
If you have a subwoofer in your system.
NONE
If you do not have a subwoofer in your system.
6
Press n to select PRESENCE, then press –/+
to select:
YES
If you have presence speakers in your system.
NONE
If you do not have presence speakers in your
system.
2 2
(4.8 x 4.0m, 20m )
2 2
(6.3 x 5.0m, 30m )
2 2
(7.9 x 5.8m, 45m )
2
2
2
[S
M L