Setup (Option) - Yamaha RX RX-Z7 Owner's Manual

Setup (Option)

This menu adjusts the optional system settings.
■ Memory Guard (Memory guard)
Use this feature to prevent accidental changes to sound
field program parameter values and other system settings.
Choice
Off
Turns off the "Memory Guard" feature.
On Protects the following parameters:
– sound field program parameters
– GUI menu parameters
– speaker levels settings
y
When "Memory Guard" is set to "On", " " appears on the left
side of the name of a parameter being protected.
■ I/O Assignment
(Input/output assignment)
Use this feature to assign the input/output jacks according
to the component to be used if the initial settings of this
unit do not correspond to your needs. Change the
parameter to reassign the respective jacks and effectively
connect more components.
Once the input/output jacks are reassigned, you can select
the corresponding component by using the LINPUT
selector (or the input selector buttons (3)).
Example: Assigning the CD DIGITAL INPUT
COAXIAL jack to "MD/CD-R".
1
Press 9ENTER to display the
"I/O Assignment" screen.
Coax Opt
In In
PHONO
CD
1
TV
4
MD/CD-R
BD/HD DVD
5
DVD
2 6
2
Press 9k / n /l / h to select the cell in row
"MD/CD-R", column "Coax In" and then
press 9ENTER.
3
Press 9l / h to select "1" and then press
9ENTER.
Select "None" to clear the existing assignment.
y
To return to the previous screen without change, press
9 k.
Functions
Opt Comp HDMI
Out In In
EXIT
8
A IN 1
B IN 2
Graphical user interface (GUI) menu
4
Press 9k / n /l / h to select "EXIT" and
then press 9ENTER.
y
You cannot select a specific item more than once for the
same type of jack.
■ Input Rename (Input rename)
Use this feature to change the name of the input source
that appears in the GUI screen and in the front panel
display.
1
Press 9k / n /l / h to select a character or
function and then press 9ENTER to
confirm the selection.
Repeat step 1 until you input a name you want to use.
2
Press 9k / n /l / h to select "SAVE" and
then press 9ENTER.
y
• To reset the name, select "RESET" and then press
9ENTER.
• To cancel the operation without change, select
"CANCEL" and then press 9ENTER.
■ Display Set (Display settings)
Front Panel Display (Front panel display setting)
Dimmer (Dimmer)
Use this feature to adjust the brightness of the front
panel display.
Control range: –4 to 0
Scroll (Front panel display message scroll)
Use this feature to set the front panel display message
scroll pattern.
Choice
Continue Continuous mode.
Select this to display the operation status in the
front panel display in a continuous manner.
Once Scroll-once mode.
Select this to display the operation status in the
front panel display by the first 14 alphanumeric
characters after scrolling all characters once.
Short Message (Short message display)
Use this feature to activate or deactivate the short message
display displayed in the GUI screen in the main zone.
Choice
On
Activates the short message display function.
Off Deactivates the short message display function.
Functions
Functions
105
En