Setting The Sleep Timer - Yamaha RX V2095RDS Owner's Manual

Setting the SLEEP timer

Use the built-in SLEEP timer to automatically turn this unit into the standby mode after the time you set elapses. The SLEEP timer is
useful when you plan to fall asleep while this unit is playing back or recording a source. The SLEEP timer also automatically turns off
external units connected to the SWITCHED AC OUTLETS on the rear of this unit. The SLEEP timer can only be set using the
remote controller.
To set the SLEEP time
1
Select the source using the INPUT SELECTOR and
start playback (or select a broadcast station) on the
source unit.
2
Press the SLEEP key repeatedly until the desired
SLEEP time appears on the display.
* "SLEEP time" is the time that elapses before this unit
is automatically turned into the standby mode.
A
B
C
REMOTE CONTROL
TRANSMITTER
Indicates the SLEEP time.
SPEAKERS
A
Each time you press the SLEEP key, the SLEEP time
changes as follows.
(Minutes)
120 90
SLEEP OFF
(The SLEEP timer is off.)
After a while, the display returns to the original indication.
SLEEP
DVD/LD TAPE/MD
TV/DBS CD
VCR 1 TUNER
VCR 2 PHONO
V-AUX
SLEEP
Flashes.
60 30
To cancel the SLEEP timer
Press the SLEEP key repeatedly until "SLEEP OFF" appears
on the display. (After a while, the display returns to the original
indication.)
A
B
C
REMOTE CONTROL
TRANSMITTER
Note
The SLEEP timer setting can also be canceled by setting this
unit into the standby mode with the STANDBY/ON switch on
the front panel (or the STANDBY key on the remote controller)
or disconnecting the power plug of this unit from the AC outlet.
ADVANCED FEATURES
SLEEP
71