Remote Controlling Zone 2/Zone 3 - Yamaha HTR-5790 Owner's Manual

Using this unit's internal amplifier
To use this unit's internal amplifier, select ON in ZONE2 AMP.

Remote controlling Zone 2/Zone 3

The supplied remote control can be used to control Zone
2/Zone 3. You can even select the input source and control
components located in the main room directly from the
second room regardless of the listening condition in the
main room.
To enable Zone mode on the remote
control
You will be able to switch the remote control mode from
one room to another, and use STANDBY, SYSTEM
POWER, MUTE and VOL –/+ to control the selected
room.
1
Repeat steps 1 and 2 of the procedure in
"Setting manufacturer codes" on page 60.
2
Press j / i to select "L:AMP".
+
TV VOL
CH CH
TV MUTE
– +
SELECT
PRESET PRESET
TV VOL
–
3
Press u / d to select "ZONE".
+
TV VOL
CH CH
TV MUTE
– +
SELECT
PRESET PRESET
TV VOL
–
4
Press LEARN to complete the Zone setup.
The remote control will be able to operate this unit,
Zone 2 or Zone 3.
LEARN
ZONE 2/ZONE 3 (U.S.A., CANADA AND AUSTRALIA MODELS ONLY)
R L
+
–
PRESENCE/ ZONE 2
Second room
This unit
To control Zone 2/Zone 3
1
Press SELECT k repeatedly to display
"ZONE2" or "ZONE3" in the display window.
2
Press SYSTEM POWER to turn Zone 2 or
Zone 3 power on.
3
Press an input selector button to select the
input source you want to listen to in the
second/third room.
The display window shows "2: name of selected
input" if the remote control is in the Zone 2 mode.
Note
Signals input to V-AUX and PHONO jacks cannot be sent to
Zone 2/Zone 3.
or
SELECT
PHONO TUNER CD MULTI CH IN
V-AUX CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
SELECT
69