V240m UK Banking Installation Guide for New Orders 1.0.0
MERCHANT INSTRUCTIONS
V240m Bluetooth
Step
Instruction
1
If you would like to use Bluetooth connectivity, then
you plug in your Ethernet / LAN cable into the Ethernet
port on the back of the full feature base unit.
The use of Bluetooth requires the purchase of the Full
Functioning Bluetooth base
2
Plug the power supply into the power slot of the base
unit.
3
The base unit will then show a flashing white LED
while it boots up. This will eventually become solidly
illuminated.
4
You can now place the V240m terminal onto the base
unit.
The V240m will start booting up (provided the power
supply is plugged into a main socket).
Screen Information
P a g e
| 25