Yamaha DSP-AX463 Owner's Manual page 41

Yamaha av amplifier owner's manual
Hide thumbs Also See for DSP-AX463:
Table of Contents

Advertisement

■ Editing sound fields parameters
You can enjoy good quality sound with the factory default
parameters. Although you do not have to change the initial
settings, you can change some of the parameters to better
suit the input source or your listening room.
While listening to a source, press 4 AMP
1
and then press QPARAMETER.
2
Press 7k / n to select the desired parameter
you want to change.
3
Press 7l / h to change the parameter
value.
Note
You cannot change parameter values when "MEMORY GUARD"
in "OPTION MENU" is set to "ON" (see page 57).
y
Initial settings are indicated in bold under each parameter.
For Pop/Rock, Hall, Jazz, Game, TV Sports,
Movie Spacious and Movie Dramatic:
DSP level DSP LEVEL
Function:
Adjusts the effect level.
Choices:
MIN, MID, MAX
For 2ch Enhancer and 5ch Enhancer:
Effect level EFFECT LEVEL
Function:
Adjusts the effect level.
LOW, HIGH
Choices:
For Pro Logic II Music:
Panorama PANORAMA
Function:
Sends stereo signals to the surround
speakers as well as the front speakers for
a wraparound effect.
OFF, ON
Choices:
Dimension DIMENSION
Function:
Gradually adjusts the sound field either
towards the front or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the
front), initial setting is STD (standard).
Center width CT WIDTH
Function:
Adjusts the center image from all three
front speakers to varying degrees. A
larger value adjusts the center image
towards the front left and right speakers.
Control range: 0 (center channel sound is output only
from center speaker) to 7 (center channel
sound is output only from front left and
right speakers), initial setting is 3.
Sound field programs
39
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsp-ax563

Table of Contents