Connecting Speakers - Yamaha DSP-A590 Owner's Manual

CONNECTING SPEAKERS

Connect the respective speakers to this unit as figured below.
Center speaker
Note on front speaker connection:
One or two speaker systems can be connected to this unit. If
you connect only one speaker system, connect it to either the
SPEAKERS A or B terminals.
FRONT LEVEL switch
<
U.K., Europe and Australia models only
Normally set to "0 dB". If desired, you can decrease the
output level at the FRONT SPEAKERS terminals by 10 dB by
setting this switch to "–10 dB".
l0 dB
FRONT
LEVEL
Rear speakers
Right
8 MIN.
/SPEAKER
REAR
CENTER
C
DUAL
C D:4 MIN./SPEAKER SINGLE
SINGLE:8 MIN./SPEAKER
SPEAKERS
SPEAKERS
A
B
FRONT
Right
Front speakers B
>
0 dB
Left
OUTPUT
FRONT CENTER REAR
D
LOW
PASS
fc:200Hz
A
A OR B:8 MIN.
/SPEAKER
A B:l6 MIN.
/SPEAKER
B
- l0 dB 0 dB
FRONT
LEVEL
Right
FRONT LEVEL
switch
(U.K., Europe and
Australia models)
Left
Note on center speaker connection:
One or two center speakers can be connected to this unit. If
you cannot place the center speaker on or under the TV, it is
recommended to use two center speakers and place them on
both sides of the TV to orient the center sound at the center
position. For connecting two center speakers, follow the
method shown below.
REAR
CENTER
Center speaker
Left
Front speakers A
C D
DUAL
SINGLE
Center speaker
9