Speaker Balance Adjustment - Yamaha DSP-A590 Owner's Manual

This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test
tone generator. With this adjustment, the sound output level heard at the listening position will be the same from each speaker.
This is important for the best performance of the digital sound field processor.
The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.
Otherwise, the result may not be satisfactory.
4
2
1
Set to the "
2
Select the front speakers to be used.
* If you use two front speaker systems, press both the A
and B switches.
3
BASS
0
l l
2 2
3 3
4 4
5 5
Set to the "0" position.
12

SPEAKER BALANCE ADJUSTMENT

5
3
∞
" position.
SPEAKERS
A B
ON
ON
OFF
OFF
TREBLE BALANCE
0
l l l
2 2 2
3 3 3
4 4 4
5 5 L 5
1
4
5
Select the
ENHANCED mode, so that the corresponding name is
illuminated on the display.
EFFECT
0
l
2
3
4
5 R
REC PAUSE DIR A PLAY DIR B TAPE MON
TEST STOP LD/TV
ENHANCED CNCT VIDEO VCR 1
PRO LOGIC
SUR.
CENTER
LEVEL MONO MOVIE STADIUM DISCO VCR 2
EFFECT
ROCK HALL ON/OFF V AUX
REAR
DELAY TIME VOLUME
LEVEL
POWER
PRO LOGIC or
CONCERT MONO
PRO LOGIC ENHANCED VIDEO MOVIE STADIUM
5
PRO LOGIC
ROCK CONCERT
DISCO CONCERT HALL