HP ProCurve Planning And Implementation Manual page 30

Planning
Planning Your PoE Configuration
HP ProCurve Switch
5300xl
HP ProCurve Switch
xl PoE modules
HP 610 RPS/EPS
Figure 3-9. Example of an HP 610 EPS Powering Two Modules
In this example there are two modules connected to the HP 610 EPS, however
each module will be supplied with 204 watts of PoE power to be distributed
to each module's 24 ports at 8.5 watts per port, because both modules are
connected to the same pair of ports, pair A.
3-12
LED Mode
Std PoE PoE EPS
Status
Link 1 Mode 2 3 4 5 6
PoE
hp procurve
PoE
xl module
J8161A 7 8 9 10 11 12
Source of Watts
Power Available
External PoE 204/each
Power module
Supply
PoE-Ready 10/100-TX Ports (1-24) – all ports are HP Auto-MDIX LED Mode
Std
13 14 15 16 17 Link 18 Mode Link 1 Mode 2 3
PoE
hp procurve
xl
PoE
xl module
module
19 20 21 22 23 24 J8161A 7 8 9
# of Ports Powered and
Average Watts/Port
24 @ average 8.5 W each
PoE-Ready 10/100-TX Ports (1-24) – all ports are HP Auto-MDIX
PoE PoE EPS
Status
4 5 6 13 14 15 16 17 Link 18 Mode
xl
module
10 11 12 19 20 21 22 23 24
Redundant # of Ports
Powered and Average Watts/
Port
None