HP ProCurve Planning And Implementation Manual page 29

HP ProCurve Switch
5300xl
HP ProCurve Switch
xl PoE modules
HP 610 RPS/EPS
Figure 3-8. Example of an HP 610 EPS Powering Two Modules
In this example there are two modules connected to the HP 610 EPS. Each
module will be supplied with 408 watts of PoE power to be distributed to each
modules 24 ports at 15.4 watts per port, because each module is connected to
a different pair. One module to one port of pair A and one module to one port
of pair B.
Source of
Power
External PoE
Power
Supply
LED Mode PoE-Ready 10/100-TX Ports (1-24) – all ports are HP Auto-MDIX
Std PoE PoE EPS
Status
Link 1 Mode 2 3 4 5 6 13 14 15 16
PoE
hp procurve
PoE
xl module
J8161A 7 8 9 10 11 12 19 20 21 22
Watts # of Ports Powered and
Available Average Watts/Port
408/each 24 @ average 15.4 W each
module
Planning Your PoE Configuration
LED Mode
Std PoE PoE EPS
Status
17 Link 18 Mode Link 1 Mode 2 3 4 5 6 13
PoE
hp procurve
xl
PoE
xl module
module
23 24 J8161A 7 8 9 10 11 12 19
Redundant # of Ports
Powered and Average Watts/
None
Planning
PoE-Ready 10/100-TX Ports (1-24) – all ports are HP Auto-MDIX
14 15 16 17 Link 18 Mode
xl
module
20 21 22 23 24
Port
3-11