Recovery - Seagate Lyve Drive Shuttle User Manual

Recovery

If an internal issue is detected when starting, Lyve Drive Shuttle may automatically initiate a recovery.
To complete the recovery:
1. Tap to choose one of the recovery options:
Revert all
settings
Erase data and
reset device
2. Tap Apply.
3. At the prompt, confirm your choice by tapping Revert.
4. When the recovery is complete, tap Power off.
5. To power on Lyve Drive Shuttle, disconnect and reconnect the power cable.
Seagate Lyve Drive Shuttle
Revert only settings to factory defaults. Data and
password remain untouched.
Erase all data and revert settings to factory defaults.
You must reconfigure the device after the reset. This
option permanently removes all data and cannot be
undone.
4/20/20 26