Fo Lder Naming Co Nventio Ns; Performing Incremental Copies - Seagate Lyve Drive Shuttle User Manual

MM Minutes
UUID Universally unique identifier designating the device from which
the files were copied
N Session number
Take for example the following directory:
20201001.1306.XFGT6G.1
Lyve Drive Shuttle would have created this directory on October 1, 2020, at 1:06pm. The source of the
content was a device with a UUID of XFGT6G. This was the first upload of content from this device on this
day.
Folder naming conven ons
When viewing your copied files in Lyve Drive Shuttle > Backups, folder names created during incremental
copies are appended with _update. Folder names from copies that were interrupted are appended with
_incomplete.
Backup type
Full
Incremental
Incomplete

Performing incremental copies

When a new storage device is detected, Lyve Drive Shuttle will copy all files from the source. If the same
drive is connected again at a later date, Lyve Drive Shuttle will perform either a full or incremental copy,
depending on your copy settings.
Full
Incremental
Enabling incremental copies
Seagate Lyve Drive Shuttle
Sample folder name
20200401_1120_Garmin_VirbUltra30_878555
20200401_1120_Garmin_VirbUltra30_878555_update
20200401_1120_Garmin_VirbUltra30_878555_incomplete
All files on the storage device are copied,
regardless of whether some or even all files on
the device were copied previously.
Only new files on a previously ingested storage
devices are copied to Lyve Drive Shuttle.
Incremental copies can save storage space and
copying time.
4/20/20 23