Yamaha LPX-500 Owner's Manual page 74

The projector supports the following 4 projection methods, allowing you to choose the best
method for displaying your images.
After setting up the projector, refer to the OWNER'S MANUAL for details on turning on the
power and adjusting settings such as the screen size. ( "Basic Operations" in OWNER'S
MANUAL)
Be sure to read "Caution" in OWNER'S MANUAL for details on safe
handling when setting up the projector.
Front projection
Rear projection using a
translucent screen
* When installing to the ceiling or projecting from behind the screen, set the "Installation" command in the
"Setup" menu to match the method of projection being used.
" "
( Setup menu in OWNER'S MANUAL)
A special method of installation is required in order to suspend the
projector from the ceiling. Please contact the place of purchase if you
would like to use this installation method.
5
Setting-up Methods
Front/ceiling projection
Rear projection onto a
translucent screen with the
projector installed to the ceiling