Selecting The Image Aspect Ratio; Normal Mode - Yamaha LPX-500 Owner's Manual

Selecting the Image Aspect Ratio

The aspect ratio
the aspect ratio settings that can be selected will vary depending on the input signal.
Input signal
Video (SDTV )
Video (HDTV )
Computer (SVGA
Computer (XGA
Do not use the aspect mode function to elongate or compress image that are being projected for
commercial purposes or in public places such as hotel lobbies or stores, as doing so may infringe
the rights of the original copyright owner for the images under copyright protection laws.
Procedure
Projector
Details of each aspect ratio are as follows.

Normal mode

4:3 image
for projected images can be selected from the following five types of setting. However,
Normal Squeeze
O O
O
or lower)
O
or higher) O
Remote control
Normal
Focusing the
Screen Image
Selecting the
Picture Mode
Zoom
Zoom
-Subtitle-
O O
- - -
- O -
- O -
For Video (SDTV) signals, the aspect
mode changes in the following order
each time the [ASPECT] button on
either the projector's control panel or
the remote control is pressed.
Normal → Squeeze → Zoom → Zoom -Subtitle-
→ Through → Squeeze Through
The current setting appears on the screen each
time the aspect ratio changes.
The aspect ratio of the images being input
is maintained, and the images are
projected into a 16:9 screen area.
When 4:3 images are being projected,
black bands will appear at the left and
right of the image as shown in the
illustration at left.
Selecting the Image
Aspect Ratio
Automatic Adjustment
of Computer Images
Through Squeeze Through
O O
O
-
(720p only)
O -
- -
15