State Of Charge; Leds On Battery; Led On Charger; Assembling The Blower - Stihl BGA 57 Instruction Manual

English
2
4
1
► Insert the plug (6) in a convenient wall outlet (7).
The charger (3) runs a self test. The LED (4) glows green
for about 1 second and then red for about 1 second.
► Fit the connecting cable (5).
► Insert the battery (2) in the guides in the charger (3) and
press it home as far as stop.
The LED (4) glows green. The LEDs (1) glow green and
the battery (2) is being charged.
► If the LED (4) and the LEDs (1) stop glowing: The battery
(2) is fully charged and can be taken out of the charger (3).
► If the charger (3) is no longer required. Disconnect the
plug (6) from the wall outlet (7).
6.3

State of Charge

1
► Press the button (1).
The LEDs (5) glow green for about 5 seconds and indicate
the state of charge.
14
3
7
6
5
80-100%
60-80%
40-60%
20-40%
0-20%
► If the LED on the right flashes green: Charge the battery.
6.4

LEDs on Battery

The LEDs can show the state of charge or malfunctions. The
LEDs can glow or flash green or red.
The state of charge is indicated when the LEDs glow or flash
green.
► If the LEDs glow or flash red: Troubleshooting, @ 17.1.
Malfunction in blower or battery.
6.5

LED on Charger

The LED indicates the operating status of the charger.
If the LED glows green, the battery is being charged.
► If the LED flashes red: Rectify the malfunction.
Malfunction in charger.

7 Assembling the Blower

7.1

Mounting, Adjusting and Removing the Nozzle

The nozzle can be mounted to the blower tube in three
positions to suit the height and reach of the user. The
positions are marked on the blower tube.
► Switch off the blower and remove the battery.
1
2
► Line up the lug (3) and the slot (2).
7 Assembling the Blower
3
4
0458-807-8321-A