Operation Of Handi-Lift Ea7; Operation From The Lifts Control Panel; Emergency Stop - Cama Handi-Lift 7 Handbook

Hide thumbs Also See for Handi-Lift 7:
Table of Contents

Advertisement

2.1 Operation from the lifts control panel:

20) Emergency stop

21) Joystick
22) *Connection for remote control with spiral wire
23) Emergency call
24) Light diode
25) *Key lock
* Extra equipment (not standard on all lifts).
The control panel of the Handi-lift is situated as shown on the sketch section 1.2 pos 13.
2.1.1 Emergency stop:
If the red button is pushed down the emergency stop will be activated and a light will
appear (pos. 1 on the sketch above). The emergency stop will cut off the power supply
for the lift, and if the emergency stop is activated it is not possible to drive with the lift.
To release the emergency stop you need to turn the red button clockwise until the button
comes up again and the lift can now drive again. Please make sure that the emergency
stop always is released.
© 2010

2 Operation of Handi-Lift EA7

Page 8
Version 1.0
Handi-lift 7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents