Operation With Wireless Remote Control - Cama Handi-Lift 7 Handbook

sketch in section 2.1); please observe that the guide pins on the plug fits, when you
insert the plug.
2.3.1 Up:
Push the Up-button down and hold it down (pos 1 on sketch above), this will make the
lift drive up.
2.3.2 Down:
Push the Down-button and hold it down (pos 2 on sketch above), this will make the lift
drive down.

2.4 Operation with wireless remote control:

The wireless remote control, as shown on the sketch, is extra equipment and is not
standard on all lifts. The remote control can replace the control box (see section 2.2.).
The remote control can be used to call the lift to the desired position either by the user or
a helper. A helper can operate the lift with this control. OBS: when using the wireless
remote control the lift MUST be under supervision.
© 2010
1. Up
2. Down
3. Open
4. Close
Page 13 Version 1.0
Handi-lift 7