Emergency Lowering - Cama Handi-Lift 7 Handbook

Handi-lift 7
2.4.1 Up:
The up-button (Pos 1 on the above sketch) is used to drive the lift up the stairs, push the
button down and hold it down to get the lift to drive. If you let go of the button when
driving, you will have to wait a couple of seconds before the button can activate the lift
again.
If you are positioned at the top of the stairs and the lift is parked at the bottom of the
stairs, you can use the up-button to call the lift to the desired position.
2.4.2 Down:
The down-button (pos 2 on above sketch) is used to drive the lift down the stairs. The
down-button works as the up-button, except it makes the lift go down the stairs.
2.4.3 Open:
The open-button (pos 3 on above sketch) is used to fold the platform down, so you can
drive on the lift. Please note that you have to drive on to the lift with the front
downwards. Remember to brake the wheelchair.
The open-button works only when the lift is parked on upper or lower landing.
Warning! Never fold the platform down if there is a person or an object under the
platform.
2.4.4 Close:
The close-button (pos 4 on the sketch in section 2.4) is used when you wish to park the
lift. Push the close-button and the barrier arms go up and the platform is closed
automatically. Please note that the close-button only works when the lift is parked on
upper or lower landing.
Warning! Never fold the platform up if there is a person or an object on the platform.

3 Emergency lowering

Disconnect the power to the lift on the main switch!
Find the 8mm Umbraco screwdriver that came with the lift.
© 2010 Page 14 Version 1.0