F3.5: 1St Voice Effect Depsth; F3.6: 2Nd Voice Effect Depth; F3.7: Reset; F4 Soft Pedal Mode - Yamaha YPP-200 Ligh Piano Owner's Manual

F4
Soft Pedal Mode
F5
Metronome Volume
F6
Preset Song Part Cancel Volume
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

F3.5: 1st Voice Effect Depsth

F3.6: 2nd Voice Effect Depth

These functions make it possible to individually set the depth of the effect for the 1st and
2nd dual-mode Voices ("1st" and "2nd" is explained on page 17). Use the [–/NO] and
[+/YES] buttons to set the effect depth for the corresponding voice as required. The depth
range is from 0 through 20. A setting of "0" produces no effect, while a setting of "20" pro-
duces maximum effect depth. Press the [–/NO] and [+/YES] buttons simultaneously to recall
the default setting (different for each voice combination).
• The effect depth settings cannot be changed unless the EFFECT is ON. The Function mode must be
exited before EFFECT can be turned ON.

F3.7: Reset

..........................................................................................................................................................
This function resets all dual-mode functions to their default values. Press the [+/YES]
button to reset the values. "End" will appear on the display when all functions have been
reset.
This function sets the footswitch connected to the SOFT jack for normal soft pedal opera-
tion or for song start/stop operation. Use the [–/NO] or [+/YES] buttons to select the desired
soft pedal mode. "1" engages the normal soft pedal mode, and "2" engages the start/stop
mode. When the start/stop mode is engaged, the footswitch connected to the SOFT jack
functions in the same way as the SONG [START/STOP] button on the panel.
Press the [–/NO] and [+/YES] buttons simultaneously to recall the default setting of "1".
I SHORTCUT: You can jump directly to the metronome functions by pressing the [FUNC-
TION] button while holding the METRONOME [START/STOP] button.
The volume of the metronome sound can be changed. After selecting "F5", use the [–/NO]
and [+/YES] buttons to set the metronome volume as required. The volume range is from 1
through 20. A setting of "1" produces minimum sound, while a setting of "20" produces
maximum metronome volume. Press the [–/NO] and [+/YES] buttons simultaneously to recall
the default setting "10".
This function sets the volume at which a "canceled" part is played during preset song
playback (see page 16 for information on the "part-cancel" function). Use the [–/NO] and
[+/YES] buttons to set the volume as required. The volume range is from 0 through 20. A
setting of "0" produces no sound, while a setting of "20" produces maximum volume. Press
the [–/NO] and [+/YES] buttons simultaneously to recall the default setting "5".
Adjust the part volume to a comfortable level to use the "canceled" part as a guide to play
along with. Set to "0" if you don't want to hear the part.
.........................................................................................................
...........................................................................................................
The Function Mode
29
YPP-200