Yamaha QR10 Owner's Manual page 48

8: Recording Original Patterns (continued)
Press [START/STOP] to Copy
5
Press the [START/STOP] key to actually copy the source pattern to the specified destination pattern number, or [EXIT] to
exit from the COPY function.
Any previous data in the destination pattern location will be erased and replaced by the
IMPORTANT
source pattern when the copy function is executed.
If the QR10 memory becomes full due to a copy operation, the memory full error display — "ERR
DETAIL
3" — will appear. If this happens, use the pattern clear (page 40) and song clear (page 34)
functions as necessary to erase unwanted data to make room for the data to be copied.
42