Play The Demo - Yamaha QR10 Owner's Manual

Play the Demo

Once you've set up your QR10 and become familiar with the controls, you might like to play back the pre-programmed
demonstration for a sample of what the QR10 can do.
1
Press the [DEMO] key (this is the same as the
"6th" chord type key) while holding the
[SHIFT] key.
2
Use the [–1] and [+1] keys, or the number
keys, to enter the number of the demo song
you want to play (0 through 2).
3
Press the [START/STOP] key to begin
playback.
If demo song number 0 or 1 is selected, demo
song numbers 0 and 1 will play alternately and
repeat until stopped.
If demo song number 2 is selected it will
repeat until stopped.
4
Press the [START/STOP] key again when you're ready to stop playback.
Demo playback will repeat continuously until stopped by pressing the [START/STOP] key.
DETAIL
5
Press the [EXIT] key (this is the same as the
[PATTERN/SONG] key) to exit from the
DEMO function.
Demo song number 0 is a complete song including melody and accompaniment parts.
Demo song number 1 shows how the QR10 Phrase function (page 26) can be used to add variety
DETAIL
and interest to your songs.
Any of 100 phrases can be added at any point in a song simply by pressing one of the QR10 PHRASE
keys.
Demo song number 2 plays all 50 preset songs in sequence.
3: The QR10 Controls (continued)
or
9