Yamaha PortaTone PSR-S700 Owner's Manual page 93

FILTER
HARMONIC CONTENT
BRIGHTNESS
TUNE
PORTAMENTO TIME
PITCH BEND RANGE
OCTAVE
TUNING
TRANSPOSE
EFFECT
TYPE
REVERB
CHORUS
DSP
EQ (Equalizer)
TYPE
EDIT
EQ HIGH
EQ LOW
Allows you to adjust the resonance effect (page 101) for each
part.
Determines the brightness of the sound for each part by adjusting
the cutoff frequency (page 101).
Portamento is a function that creates a smooth transition in pitch
from the first note played on the keyboard to the next. The
Portamento Time determines the pitch transition time. Higher
values result in a longer pitch change time. Setting this to "0"
results in no effect. This parameter is available when the selected
keyboard part is set to Mono (page 100).
Determines the range of the PITCH BEND in semitones for each
keyboard part (when a pedal is assigned to this function).
Determines the range of the pitch change in octaves for each
keyboard part.
Determines the pitch of each keyboard part.
Allows you to set the transposition for the keyboard pitch (KEY-
BOARD), Song playback (SONG), or overall sound of the instru-
ment (MASTER), respectively.
Select the desired effect type (page 95). After editing various
parameters for the selected effect type, you can save it as an orig-
inal effect.
Adjusts the amount of the Reverb sound for each part or chan-
nel.
Adjusts the amount of the Chorus sound for each part or chan-
nel.
Adjusts the amount of the DSP sound for each part or channel.
Select the desired EQ type to suit the type of music and the per-
formance environment (page 97). This affects the overall sound
of the instrument.
For editing the EQ (page 98).
Determines the center frequency of the high EQ band that is
attenuated/boosted for each part.
Determines the center frequency of the low EQ band that is
attenuated/boosted for each part.
Editing the Volume and Tonal Balance (MIXING CONSOLE)
PSR-S900/S700 Owner's Manual 93