Saving And Recalling Your Original Settings As A Single File - Yamaha PortaTone PSR-S700 Owner's Manual

Restoring the Factory-programmed Settings
80 PSR-S900/S700 Owner's Manual
Saving and Recalling Your Original Settings as
a Single File
For the items below, you can save your Original Settings as a Single File for future recall.
1
Make all desired settings on the instrument.
2
Call up the operation display.
[FUNCTION] → [J] UTILITY → TAB [ √ ][ ® ] SYSTEM RESET
3
Press one of the [F]–[I] buttons to call up the relevant display for sav-
ing your data.
Parameters set on the various displays such as the [FUNCTION] → UTILITY
SYSTEM SETUP
and microphone setting display are handled as a single System Setup file.
Refer to the Data List for details on which parameters belong to the System
Setup. The Data List is available at the Yamaha website. (See page 5 .)
MIDI SETUP The MIDI settings including the MIDI templates on the User tab display are
handled as a single file.
USER EFFECT The User Effect settings including the user effect types, user master EQ
types, and user vocal harmony types (PSR-S900) created via the Mixing
Console displays are managed as a single file.
MUSIC FINDER All the preset and created records of the Music Finder are handled as a single file.
4
Select one of the tabs (other than the PRESET) by pressing the TAB
[ √ ][ ® ] buttons.
Note that the file in the PRESET tab display is the file of factory-programmed
settings. If you select it, the factory-programmed settings for the respective
item will be restored. (This is the same results as on page 79 "Restoring the
Factory-programmed Settings Independently by Item.")
5
Save your file (page 73).
6
To recall your file, select the tab and page to which you've saved the
file (same tab and page as specified in step 4), and press the corre-
sponding [A]–[J] button.