The Functions; Selecting And Setting Functions - Yamaha Portatone PSR-E403 Owner's Manual

The Functions

The "Functions" provide access to a range of detailed instrument parameters for tun-
ing, setting the split point, and adjusting the voices and effects. Take a look at the func-
tion list starting on the opposite page. There are 54 function parameters in all.
When you locate a function you want to set up, simply select the function's display
name (shown to the right of the function name in the list) and adjust as required.

Selecting and Setting Functions

1
Find the function you want to set in the
list that begins on page 83.
2
Press the [FUNCTION] button.
100
3
Select a function.
Press the CATEGORY [ ] and [ ] buttons as
many times as necessary until the function's
display name appears in the display.
82
PSR-E403/YPT-400 Owner's Manual
00
The selected function.
4
Use the dial, the [+] and [-] buttons, or
the [0]–[9] number buttons to set the
selected function as required.
The [+] and [-] buttons are used to make ON/
OFF type settings: [+] = ON, [-] = OFF.
In some cases the [+] button will initiate execu-
tion of the selected function, and the [-] will
cancel the selection.
• Decrement value by 1.
• OFF
• Cancel
Press simultaneously to
recall the default setting.
Function settings are stored in memory as soon
as they are changed. To restore all initial factor
default settings perform the "Backup Clear"
procedure described in the "Initialization" sec-
tion on page 56.
Direct numeric
entry.
• Increment value by 1.
• ON
• Execute