Utility Settings - Yamaha PSR-9000 Owner's Manual

The PSR-9000 "Functions"

Utility Settings

The explanations here apply to step #3 of the Basic Procedure on page 134.
Configuration
1, 2
Select this to display the system
information of the PSR-9000.
This determines whether all wave data that was in
the wave RAM memory when the power was previ-
ously turned off will be automatically reloaded from
disk when the PSR-9000 power is turned on.
3
This sets the metronome on or
off during song playback.
This sets the metronome on or
off during song recording.
4, 5
Select a parameter you
want to lock or unlock.
142
Reference
When set to OFF, the PSR-9000's
built-in speaker system is turned off.
Setting this to ON enables the PSR-9000 to read data much
This sets the volume of
faster from the floppy disk. This is done by use of built-in
the PSR-9000 metro-
cache memory. When a floppy disk is inserted and this is set
nome sound for
to ON, the PSR-9000 automatically loads data to the cache
recording.
memory (even when you play the keyboard, accompaniment,
Multi Pads, etc.). All data is then read directly from the cache
memory rather than the disk, vastly speeding up the reading
of floppy disk data.
Lock (mark) or unlock (un-mark) the
selected parameter.
This determines whether the MIDI
bank select and program change
numbers for each voice will be shown
along with the voice number and
name on the voice list display.
This indicates the maximum number of
notes currently being played. This can be
useful in checking whether the maximum
polyphony has been exceeded in songs
or styles. The maximum value is 126 (the
PSR-9000's maximum polyphony).
Press this to reset the Poly Counter to "0".
This allows you to set the drum
voice and the velocity which will
sound when the Tap function (page
60) is used.
This function can be used to "lock"
the specified parameters so that
they can only be changed via the
direct panel controls (i.e., not via the
Registration Memory, One Touch
Setting, Music Database, MIDI,
sequence data, etc.).