Loading Data From A Disk To Flash Rom - Yamaha PSR-9000 Owner's Manual

Disk Operations

Loading Data from a Disk to Flash ROM

This operation lets you load the specified file from a floppy disk, an optional hard disk,
or an optional SCSI device to Flash ROM.
The explanations here apply to step #3 of the Basic Procedure on page 127.
Select a source file in the disk.
If an optional hard
disk has been
installed or an
optional SCSI
device has been
connected, the
appropriate device
must be selected
here.
Select a Load method.
PAGE CONTROL
BACK
Select the destination.
Select the source data
in the disk.
Execute the Load operation by following the on-screen instructions.
128
Reference
PAGE CONTROL
BACK NEXT
PAGE CONTROL
NEXT BACK
Set the data type to ON or OFF.
Select the destination. Data types set to ON will be loaded.
Flash ROM data for which the data
type has been set to OFF will be
PAGE CONTROL
retained.
BACK NEXT
Select this to display
the property of the
selected file.
For details on directory file
selection, see page 66.
NEXT
CAUTION
• When data is loaded from a
floppy disk to the PSR-9000,
the data already in the mem-
ory of the instrument will be
replaced by the data on the
disk. Save important data to
a disk file before doing the
Load operation.
• Loading style data can be exe-
cuted via the Style Manager
function (page 62).
SETUP All setup data —
see list on page
144.
EFFECT All User effect data
DATA — page 92.
REGIS- All Registration
TRATION Memory data —
page 178.
MULTI All Multi Pad data —
PAD page 119.
CUSTOM All Custom Voice
VOICE data including wave
data saved using
the Wave save op-
tion — page 80.
ORGAN All Organ Flutes
FLUTES settings — page 56.