Deleting Events - Yamaha PortaTone PSR-7000 Owner's Manual

Song Playback & Recording
C
Enter the Specified Event(s)
Once the event or events to be entered have been
specified as described in the preceding step, press
the LCD button to actually enter the event at the
current cursor position. A dot will appear on the
CHORD STEP data line and the cursor will advance
to the top of the next measure.
V
Repeat Until Done
Repeat steps 1 through 3, above, until the re-
quired number of chord changes and other accom-
paniment events have been entered. The end of the
sequence is automatically set at the end of the last
measure containing data, the insert point of an
event (available at the bottom of the

DELETING EVENTS

When the cursor is located at any previously-
entered dot on the CHORD STEP data line, the type
of event(s) recorded in that location are indicated by
triangular markers (s) to the left of the correspond-
ing event names in the event window. When only
one type of event has been entered at the cursor
location an eraser icon appears to the right of the
corresponding event in the event window, and that
event can be erased simply by pressing the
LCD button. When more that one type of event has
been entered at the cursor location the
LCD dial can be used to place the eraser icon next to
any of these events, and the specified event can be
erased by pressing the
the top of a measure can be changed but not deleted.
64
...........................................................................................................................................
.............................................
list).
..................................................................................................................................................................
LCD button. Events at