Alarm Traceback Data Display; Parameter Settings Initialization - Fagor BCSD Series User Manual

5.2.1. Alarm Traceback Data Display

The alarm traceback display can display up to 10 previously occurred alarms. The alarm is displayed on
Fn000, which is stored in the alarm traceback data.
Follow the procedures below to confirm alarms which have been generated.
1. Press the MODE key to select the utility function mode.
2. Press the INC or DEC key to select the function number of alarm trace back data display.
3. Press the ENTER key once, the latest alarm data is displayed.
Alarm
Sequence
Alarm
Number
Code
4. Press the INC or DEC key to display other alarms occurred in recent.
5. Press the ENTER key, the display will return to Fn000.
Note: Hold the ENTER key for one second with alarm code displaying, all the alarm traceback data will
be cleared.

5.2.2. Parameter Settings Initialization

Follow the procedures below to execute the parameter settings initialization.
1. Press the MODE key to select the utility function mode.
2. Press the INC or DEC key to select the function number of parameter settings initialization.
3. Press the ENTER key to enter into parameter settings mode.
4. Hold the ENTER key for one second, the parameters will be initialized.
BCSD-86/116 Digital Brushless AC Servo Drive system - Ref. 1809