Preparing For Use Of Foot Controls/Switches - Yamaha piano Operating Manual

CHAPTER 6: Other Settings
Preparing for Use of Foot
Controls/Switches
The optional foot controller (FC7) or the foot control
switch (FC4, FC5) can be connected to the Disklavier and
the desired function is assigned to them. At the maximum
of two controllers/switches can be connected
simultaneously.
Assignable functions are as follows:
[Play/Stop]:
Controls starting/stopping of playback. Tempo
control is also available (only in the FC7).
[Main Volume]:
Controls the overall volume.
[Voice Volume]:
Controls the volume of the piano voice in Quiet Mode
and Headphone Mode.
[Pitch Bend]:
Controls the pitch of the piano voice.
Setting Up the Disklavier for Foot
Controls/Switches
1
Connect a foot control/switch to the
FOOT CNTRL1/2 jack.
Bottom of the Media Center
59
Foot control/switch
(not supplied)
2
Tap on in the [Main] screen,
and then
3
Tap on [Function] of the desired foot
control/switch, and then the desired
function.
4
Tap on
Go to step 6 when you select the [Play/Stop]
function.
5
Select the detailed setting.
When [Main Volume]/[Voice Volume] is
selected
Tap on [Direction], and then press
the option.
[Up]:
Raises the volume when the foot
control/switch is pressed and turns down
the volume when released.
[Down]: Lowers the volume when the foot
control/switch is pressed and turns up
the volume when released.
.
Assignable functions
.
to select