Recording; Recording A New Song - Yamaha piano Operating Manual

CHAPTER

Recording

4

Recording a New Song

A song that you play on the Disklavier can be recorded in
the [User Library] and the recorded song can be easily
played back. Furthermore, you can select and exclusively
record the desired part.
1
Tap on
A new song will be created automatically.
2
Tap on
3
Tap on the desired part (
, or
setting (record or not).
Each time you tap on the part, its setting changes
alternately.
41
in the [Main] screen.
.
The white part won't
be recorded.
The red part will be
recorded.
,
) to change its
When you record both left- and right-
hand part, go to step 4.
When you record either left- or right-
hand part, go to step 5.
4
Tap on [Split Point], and then press
to select the desired note as the
split point.
The selected note and notes lower than that note are
assigned to the left-hand part, and the notes higher
than that are assigned to the right-hand part.
5
Press to start, and then
immediately pause recording.
Note: When the video synchronization is on
(→ pg. 43 "Video Synchronized Recording"),
recording does not pause in this step.
6
Confirm that [Recording] appears in
the Information area, and then start
playing the Disklavier.
The Disklavier starts recording.
7
Press to stop recording.
To play back the recorded song, press
.