Sfp Port - H3C S5830 Series Installation Manual

Item
Interface attributes
Max transmission
distance
Transmission medium
Standards

SFP port

The S5830-52SC switch has two GE SFP ports, and you can install the 100 Mbps or 1000 Mbps SFP
transceiver modules in
Table 17 SFP transceiver modules available for the S5830-52SC switch
Transceiver module
1000 Mbps transceiver modules
SFP-GE-SX-MM850-A
SFP-GE-LX-SM1310-A
SFP-GE-LH40-SM1310
SFP-GE-LH40-SM1550
SFP-GE-LH70-SM1550
SFP-GE-LH100-SM1550
SFP-GE-LH70-SM1470-CW
SFP-GE-LH70-SM1490-CW
Specification
•
10 Mbps, full duplex
•
100 Mbps, full duplex
•
1000 Mbps, full duplex
•
MDI/MDI-X, auto-sensing
100 m (328.08 ft)
Category-5 (or above) twisted pair cable
IEEE 802.3i, 802.3u, and 802.3ab
Table 17 in the ports.
Central
Connector
wavelength
850 nm LC
1310 nm LC
1310 nm LC
1550 nm LC
1550 nm LC
1550 nm LC
1470 nm LC
1490 nm LC
51
Max transmission
Fiber
distance
• •
50/125 μm
multi-mode
optical fiber
• •
62.5/125 μm
multi-mode
optical fiber
9/125 μm
single-mode optical 10 km (6.21 miles)
fiber
9/125 μm
single-mode optical 40 km (24.86 miles)
fiber
9/125 μm
single-mode optical 40 km (24.86 miles)
fiber
9/125 μm
single-mode optical
70 km (43.50 miles)
fiber
9/125 μm
single-mode optical 100 km (62.14 miles)
fiber
9/125 μm
single-mode optical 70 km (43.50 miles)
fiber
9/125 μm
single-mode optical 70 km (43.50 miles)
fiber
550 m (1804.46 ft)
over 50/125 μm
fiber
275 m (902.23 ft)
over 62.5/125 μm
fiber