Selecting Outputs For Each Part - Yamaha Motif DDK-7 Owner's Manual

NOTE
Chorus and variation effects
of the Rhythm, and Reverb
are not applied to the sound
output through SUB1, SUB2
and SUB1&2.
NOTE
The settings in the Utility
13
display are automatically
saved when another display
is called up.
228 DDK-7 Owner's Manual

Selecting Outputs for Each Part

You can assign each individual part of the DDK-7's sounds such as Voice, Percussion,
to be output from specific AUX OUT jacks: MAIN and/or SUB.
Press the [UTILITY] button to call up the GLOBAL Page of the
1
Utility display.
Press the [AUX OUT] button in the upper right of the display to
2
call up the AUX OUT Page.
You can assign individual parts to the AUX OUT MAIN and/or SUB jacks: each Voice
section, Organ Flute Voice, Main drum, Add drum, Accompaniment, Keyboard
Percussion, XG and microphone to the AUX OUT MAIN and/or SUB jacks.
Turn the desired output on for each part.
3
You can select these from MAIN, SUB1, SUB2 and SUB1&2.
If you select a setting other than MAIN, no sound will be heard from the headphones
and monitor speakers because the parts assigned to SUB1, SUB2 and SUB1&2 will
not be output through the PHONES and OUTPUT jacks.
Any parts assigned to the AUX OUT MAIN or SUB1&2 will be output in stereo (1:
left, 2: right). Any parts assigned to AUX OUT SUB1 or SUB2 will be output in
mono.