Pitch Change - Yamaha Motif DDK-7 Owner's Manual

PITCH CHANGE

This effect changes the pitch.
Effect Type
PITCH CHANGE
XG PCH CHG 1
XG PCH CHG 2
Parameter
Pitch
4
Pitch Fine 1
Pitch Fine 2
Initial Delay
Feedback
Level
Dry/Wet
MISCELLANEOUS
Creates special effects.
Effect Type
AMBIENCE
IMPULSE EXP
RESONATOR
VOICE CANCEL
TALKING MOD
LO-FI
DYNA FILTER
DYNA RINGMOD
RING MOD
ISOLATOR
AMBIENCE
Parameter
DelayTime
Output Phase
Dry/Wet
58 DDK-7 Owner's Manual
Value Description
-24 - +24 Determines the amount of
pitch change in semitones.
-50 - +50 Fine pitch adjustment to
detune the sound and create
a chorus effect.
-50 - +50 Fine pitch adjustment to
detune the sound and create
a chorus effect.
0.1 - 400 msec Determines the time that
elapses between the original
sound and the early
reflections.
-63 - +63 Determines the amount of
delayed repeats in the
sound. When this is set to
0%, the delayed repeat from
the second time will not
sound.
D63>W - D<W63 Determines the balance of
original sound and the effect
sound.
Value Description
0.0 - 50.0 msec Determines the delay time.
Normal, Invers Determines the phase of the
effect sound.
D63>W - D<W63 Determines the balance of
original sound and the effect
sound.
IMPULSE EXP
Parameter Value
Density 0.159 - 22.61 msec
Dispersion 4.028 msec - 4.000
sec
Wet Level 0 - 127
RESONATOR
Parameter Value
Type Type1 - 6
Decay Time 4.028 msec -
4.000 sec
LPF Cutoff 28.5Hz -
21.6 kHz (Thru)
Dispersion 0 - 16
Wet Level 0 - 127
VOICE CANCEL
Parameter Value
Low Adjust 0 - 26
High Adjust 0 - 26
TALKING MOD
Parameter Value
Vowel a, i, u, e, o
Drive 0 - 127
OutputLevel 0 - 127
LO-FI
Parameter Value
Sampling 44.1 kHz - 345.0 Hz Determines the sampling
Control
Word Length 0 - 127
Filter Type Thru, PwrBass,
Radio, Tel, Clean,
Low
Dry/Wet D63>W - D<W63
DYNA FILTER
Parameter Value
Sensitivity 0 - 127
Description
Determines the density.
Determines the resonance
time.
Determines the level of the
effected sound.
Description
Determines the type.
Determines the length of
reverberation.
Determines the cutoff
frequency of the Low Pass
Filter. The portion of the
signal above the specified
frequency is cut.
Determines the resonance
time.
Determines the level of the
effected sound.
Description
Determines the frequencies
in the lower portion of the
middle range that are
attenuated.
Determines the frequencies
in the upper portion of the
middle range that are
attenuated.
Description
Determines the specific
vowel used for the "talking"
effect.
Determines the effect depth.
Determines the output level
of the effect-processed
sound.
Description
frequency.
Determines the resolution or
roughness of the sound.
Determines the filter type.
Determines the balance of
original sound and the effect
sound.
Description
Determines the sensitivity.
The higher the value the
greater the change.