Song Settings; Changing The Melody Voice; Song Volume - Yamaha Portatone EZ-200 Owner's Manual

Song settings

Changing the Melody Voice

You can change a Song's melody Voice to any other Voice you prefer.
1
Select the Song and play it.
Refer to the section "Playing the Songs" on page 12.
2
Select the voice.
Press the [VOICE] button, and then select a desired Voice by using the
number buttons [0]–[9], [+], [-].
The selected Voice sounds when you play the keyboard.
If a Song has played through and stopped during this procedure, press
the [START/STOP] button to start playback again.
3
Press and hold the [VOICE] button for longer than a sec-
ond.
"SONG MELODY VOICE" appears in the display for a few seconds,
indicating that the Voice selected in Step 2 has replaced the Song's
original melody Voice.

Song Volume

This procedure allows you to adjust the balance between Song playback
and the notes you play on the keyboard by setting the volume of the play-
back sound.
1
Press the [SONG] button.
003
Hold for longer than a second.
BritePno
001
EZ-200 Owner's Manual
33