Adding Panel Sustain - Yamaha Portatone EZ-200 Owner's Manual

Play With a Variety of Effects
Adjusting the Reverb depth
1
Press the [FUNCTION] button a number of times until "RevLevel"
appears.
2
Set the desired Reverb depth by using the number buttons [0]–[9], [+],
[-].
The range is from 0–127.

Adding Panel Sustain

This function adds a fixed sustain to the keyboard Voices.
1
Press the [FUNCTION] button a number of times until the "Sustain"
item appears.
2
Press the [+] button to turn the Panel Sustain on.
Panel Sustain will be added to the notes you play on the keyboard
when the Panel Sustain is on. To turn it off, press the [-] button.
42
EZ-200 Owner's Manual
RevLevel
064
Current Reverb depth value
Sustain
oFF
Current setting
Sustain
on
On
NOTE
• See the section "Connect-
ing a footswitch (SUSTAIN
Jack)" on page 9 for infor-
mation on applying sustain
with the optional footswitch.
• For certain Voices, the sus-
tain effect may not be obvi-
ous or audible, even when
the panel sustain function is
turned on.