Table of Contents
Advertisement
Available languages
Available languages
MP3/WMA mode
Switching to MP3 mode
MP3 mode is activated in the same way as
normal CD mode. For further information,
please read the section entitled "Switching
to CD mode" in the "CD mode" chapter.
Configuring the display
Configuring the default display
You can display various types of informa-
tion on the current track:
•
Directory number and track number
•
Directory number and time
•
Directory number and playing time
•
Track number and playing time
•
Track number and time
To switch between the different display op-
tions,
press and hold down the DISPL
ton 8 for longer than two seconds, to
switch the display.
Note:
After the MP3 scrolling text was
scrolled once after a track change, the
information is permanently shown on
the display.
Configuring the MP3 scrolling
texts
One of the following scrolling texts is
shown once on the display with every track
change. Afterwards, the configured stand-
ard display is shown.
The available scrolling texts are:
•
Directory name ("DIR NAME")
•
Name of the track ("SONG NAME")
•
Name of the album ("ALBM NAME")
•
Name of the artist ("ARTIST")
•
File name ("FILE NAME")
Note:
Artist, track and album name are part
of the MP3-ID tag of version 1 and can
only be displayed if they have been
saved with the MP3 files (for further in-
formation, please read the instructions
but-
that came with your PC's MP3 software
or burner software).
To switch between the different display op-
tions,
press the MENU button 9.
Press the or button : repeat-
edly until "MP3 DISP" appears on the
display.
Select the desired MP3 scrolling text
with the or button :.
When you have finished making your chang-
es,
press the MENU button twice 9.
Note:
The "MP3 DISP" menu item is available
only during the playback of a CD with
MP3/WMA files.
Advertisement
Chapters
Table of Contents
