Specifications; General Specifications - Yamaha EMX620 Owner's Manual

Specifications
General Specifications
Maximum output power
Frequency response
Total harmonic distortion
Hum & noise
(Average, Rs=150 )
(with 20 Hz–20 kHz BPF)
Maximum voltage gain
(PAD: OFF)
Crosstalk at 1 kHz
Input channel equalization
Meters
Graphic equalizer
Internal digital effect
Phantom power
Limiter
LIMIT indicator
Protection circuit
(Power amp)
Foot switch
Power requirement
Power consumption
Dimensions (WxHxD)
Weight
For European Model
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 23A
Conformed Environment: E1, E2, E3 and E4
135 W/8 @0.5% THD at 1 kHz (SPEAKERS OUT)
200 W/4 @0.5% THD at 1 kHz (SPEAKERS OUT)
175 mW/40 @0.5% THD at 1 kHz (PHONES OUT)
20 Hz–20 kHz +1 dB, –3 dB @1 W output into 8
20 Hz–20 kHz +1 dB, –3 dB @+4 dB output into 10 k
Less than 0.5% @20 Hz–20 kHz, 100 W output into 4
Less than 0.3% @20 Hz–20 kHz, +14 dB output into 10 k
–124 dB equivalent input noise, –68 dB residual output noise (SPEAKERS OUT)
–88 dB residual output noise (MAIN OUT, MONITOR OUT)
–79dB (83 dB S/N)
(MAIN OUT, MONITOR OUT)
–69 dB (73 dB S/N)
(MAIN OUT, MONITOR OUT)
–75 dB (79 dB S/N)
(EFFECT OUT)
–69 dB (73 dB S/N)
(EFFECT OUT)
86 dB CH IN (Lo-Z) to SPEAKERS OUT (CH1–4)
66 dB CH IN (Lo-Z) to MAIN OUT, MONITOR OUT (CH1–4)
66 dB CH IN (Lo-Z) to EFFECT OUT (CH1–4)
48 dB CH IN (Lo-Z) to REC OUT (CH1–4)
56 dB CH IN (Hi-Z) to MAIN OUT, MONITOR OUT (CH1–4)
26 dB LINE IN to MAIN OUT
26 dB AUX IN to MAIN OUT
22 dB TAPE IN to MAIN OUT
46 dB INST IN to MAIN OUT
–65 dB adjacent input, –65 dB input to output
±15 dB Maximum
HIGH 10 kHz shelving *
LOW 100 Hz shelving *
* Turn over/roll-off frequency of shelving: 3 dB below maximum variable level.
5 points LED Meter (–10, –5, 0, +3, +6 dB) MAIN OUT
7 bands (125, 250, 500, 1k, 2k, 4k, 8k Hz) MAIN OUT
±12 dB Maximum
3 types (Vocal, L Hall, S Hall)
+15 V is supplied to electrically balanced inputs for powering condenser microphones via 2.4 k
limiting/isolation resisters.
Comp. : THD 0.5% (SPEAKERS)
Turn on. : THD 0.5% (SPEAKERS)
POWER switch on/off mute
DC detection
Temp (Heatsink Temp 90°C)
DIGITAL EFFECT MUTE : on/off
USA and Canada: 120 V AC 60 Hz
Europe: 230 V AC 50 Hz
Other: 240 V AC 50 Hz
110 W
497 275 275 mm
13 kg
(SPEAKERS OUT)
(MAIN OUT, MONITOR OUT, EFFECT OUT)
(SPEAKERS OUT)
(MAIN OUT, MONITOR OUT, EFFECT OUT)
Master level control: nominal level
Channel level controls: minimum
Master level control: nominal level
1 channel level control: nominal level
All channel level controls: minimum
1 channel level control: nominal level
15

Specifications

current
EMX620—Owner's Manual