Quitting Rhythm Pattern Program - Yamaha Electone EL-87 Owner's Manual

3
Once you have selected a User number and type, the following
display will appear, prompting confirmation of the operation.
Select "OK" to save the rhythm or "Cancel" to abort the
operation and return to the previous display.
When the pattern has been saved, the message "Completed!!"
momentarily appears.
When the pattern cannot be saved because of lack of available
memory space, the following display appears.
Press the Data Control button corresponding to "Confirm" to
return to the original Save display.
You should periodically save your rhythm as you are making it
and check the amount of remaining memory. If the rhythm
currently being edited cannot be saved because of a lack of
memory space, erase some of the less necessary percussion
sounds with the Clear function, and try saving the pattern again.
(11) Quitting the Rhythm Pattern Program
You can quit the Rhythm Pattern Program from any of its display pages.
To do this:
1
Press the PATTERN button in the DISPLAY SELECT section
once again.
If a rhythm is playing, it will automatically be stopped. The
following display will appear, prompting confirmation of the
operation.
2
Select "OK" to leave the Rhythm Pattern Program, or "Cancel"
to abort the operation and return to the previous display.
N O T E :
The Power On Reset function (see page
67) can be to delete all User rhythms from
memory.
N O T E :
If you leave the Rhythm Pattern Program
without having edited any patterns, this
display will not appear.
121