Using Preset And User Voices - Yamaha Electone EL-87 Owner's Manual

3

Using Preset and User Voices

To call up the Preset Voices and User Voices:
1
Press the Page buttons to select the MENU page.
2
Select Preset or User Flute Voices.
Eight factory-preset voices (four Jazz Organ and four Pop Organ
voices) are set to the upper row, and the eight User voices in the
bottom row are for selecting voices you created and stored with
the SAVE page.
N O T E :
The User area described in this section has no
relation to that of the Voice Menu page.
N O T E :
When you use the Upper/Lower Flute Voices
and/or other voices at the same time, only one
of the voices can be displayed at a time, even
though all voices may be operative and both
of the Upper and Lower Flute Voice LEDs
are lit.
N O T E :
Remember that the UPPER and LOWER
FLUTE VOICE buttons are on/off switches.
In the process of turning on a Flute Voice, then
switching to another function and returning to
the Flute Voice, you may unintentionally turn
the Flute Voice off. Check whether the Flute
Voice LEDs are on or off before you start to
play.
35