Registration Shift - Yamaha Electone EL-87 Owner's Manual

64
4

Registration Shift

The Registration Shift function allows you to change registrations,
all the settings you make on the panel and LCD, without taking
your hands from the keyboards. By using the right footswitch on
the expression pedal, you can "jump" to a specified registration or
step through the panel registrations in sequence, either in numeric
order or in any order you specify. Registration Shift has three
modes: Shift, Jump and User.
To select the Registration Shift functions:
Press the REGIST SHIFT button in the DISPLAY SELECT section.
REGIST SHIFT Page
OFF
1
Turns off the Registration Shift assignment.
SHIFT
2
Selects the Shift mode. In the Shift mode, each press of the
right footswitch selects the Registration Memory presets in their
numerical order. After the last preset is reached, the function
"wraps around" to select the first preset again. The numbered
buttons light up as they are selected.
JUMP
3
Selects the Jump mode. In the Jump mode, each press of the
right footswitch selects a specified panel registration.
To set the Jump mode function:
1. Select JUMP in the Registration Shift page.
The Jump "destination" appears at the right side of the
LCD.
2. Enter the desired registration number using the Data
Control buttons to select the registration number.