AT&T MLS-34D Manual page 6
Hide thumbs
Also See for MLS-34D:
- Quick reference manual (23 pages) ,
- Manual (9 pages) ,
- Quick reference manual (10 pages)
Table of Contents
Advertisement
Dial-Code Feature
Group Calling—Ring/Page
Simultaneously rings or pages all extensions in a
Calling Group.* Begin speaking when you hear
a beep; you are connected to the first extension
in the group that answers.
Group Hunting—Ring/Voice Signal
Rings or voice signals the first available (non-
busy) extension in a Hunt Group.* If an
extension does not answer, the call hunts to the
next extension after three rings, and continues to
hunt until a group extension answers.
Group Pickup
Picks up an outside call ringing at any extension
in a Pickup Group.*
Last Number Redial
Redials the last outside number you dialed (but
not a System Speed Dial number).
Loudspeaker Paging
Connects you to the (optional) loudspeaker
paging system.
Message Light Off
Turns off an MLS-model phone's message
light.
Message Light On
Turns on an MLS-model phone's message
light.
Privacy
Prevents others from joining your calls. To use,
program [
] [
] [
] on a button with lights
Feature
0
7
(the button light is on when the feature is on).
Recall
"Recalls" dial tone when you are already on a
call, so you can access a PBX or Central Office
service (e.g., Call Waiting).
Save Number Redial
Saves the last outside number you dialed into
memory (but not a System Speed Dial number).
Save a number before you hang up; the number
stays in memory until a new one is saved.
Touch-Tone Enable
Lets you dial touch-tone digits on a rotary line.
Use this feature to change to touch-tone dialing
for the rest of the call.
Calling Group, Pickup Group, and Hunt Group numbers and extensions are listed on a separate form. See
your System Manager. If this feature is programmed on a button, include the group number.
Can use this feature only if programmed onto a button with lights (see panel 4).
Dial-Code Features
Manually
Ring: [
+ Group Number (1–4)
Page: [
+ Group Number (1–4)
Ring: [
+ Group Number (1–6)
Voice Signal: [
[ ] [
Number (1–6)
[
Intercom
+ Group Number (1–4)
Dial [
[
Intercom
[
Feature
+ Extension Number
[
Feature
+ Extension Number
Not available
Dial [
Dial [
before hanging up
To redial later, press
[
Feature
Dial [
6
(continued)
To Dial
To Use On a
Button
] [
]
Press the button
Intercom
7
] [ ] [
]
Intercom
7
] [
] [
]
Press the button
Intercom
7
7
]
Intercom
] [
] + Group
7
7
] [
] [
]
Press the button
6
6
] [
] [
]
Press the button
Feature
0
5
Press the button
] [
] [
]
7
0
] [
] [
]
1
0
Press the button +
Extension Number
] [
] [
]
Press the button +
0
9
Extension Number
Press the button
to turn on and off
] [
] [
]
Press the button
Feature
0
3
] [
] [
]
Press the button
Feature
0
4
before hanging up
To redial later, press
the button again
] [
] [
] again
0
4
Press the button
] [
] [
]
Feature
0
8
Advertisement
Table of Contents
